LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 746 (74 - Seat UPHOLSTERIES, Cover) >> WM 741019 Removing and installing padding for front seat >> Removing padding for front seat

Removing padding for front seat

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. On vehicles with heated seats:  Disconnect connector for seat heating.
    G12836264
    1. 1.1. Release electric plug connection for seat heating -1-  (- a-  ) and disconnect it - A-  .
    2. 1.2. Release electric plug connection for seat heating for seat-surface extension -2-  (- b-  ) and disconnect it - B-  .
  2. Release and disconnect electric plug connection for occupant detection (Bodysense).
  3. Remove fixing clip -1-  .
    G12836265
  4. Disengage cover at the sides -2-  (- A-  ).
  5. Unscrew fastening screws -3-  and pull the bracket -4-  down out of the catches - B-  .
    G12836266
  6. Disengage the cover at the sides - C-  .
    G12836267
  7. Disengage the cover at the front - D-  .
    G12836268
  8. On vehicles with seat-surface extension:  Disengage cover on the seat-surface extension - E-  .
  9. Press in expansion rivet pin -5-  and pull out the expansion rivet.
    G12836269
  10. Disengage the cover at the rear - F-  .
  11. Disengage the cover at the sides - G-  .
  12. Disengage the cover at the rear - H-  .
    G12836270
  13. Pull the cover forward between the padding for the seat and backrest - I-  .
    G12836271
  14. On vehicles with seat-surface extension:  Disengage seat extension straps at both sides.
    G12836272
    1. 14.1. Lift up padding for rear seat.
    2. 14.2. Push back the bar -1-  on the cover - A-  .
    3. 14.3. Disengage strap for seat-surface extension -2-  and guide it through in a downward direction - B-  .
    4. 14.4. Loosen 4 red clips in the rear area on the securing wire.
  15. Remove seat cover together with the padding from the seat frame.
  16. IMPORTANT: The mat for the occupant classification system must not be damaged or removed from the padding.
scientia non olet · About LEMON Manuals