Installing oddments tray

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Check that the clips are not bent or broken.

Check that all clips are positioned fully and correctly.

Replace damaged or missing clips with new ones.

Installation is performed in reverse order.
Tighten fastening nuts securing center console to selector support to Tightening torque 8 Nm (6 ft lb.) .
Tighten fastening nuts securing center console to cardan tunnel to Tightening torque 20 Nm (15 ft lb.) .