LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (63 - Bumpers) >> WM 635719 Removing and installing rear retaining strip >> Installing rear retaining strip

Installing rear retaining strip

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening nuts to the specified tightening torque. Tightening torque 9.7 Nm (7.5 ft lb.) 
scientia non olet · About LEMON Manuals