LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (63 - Bumpers) >> WM 635619 Removing and installing rear panel >> Installing rear panel

Installing rear panel

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that the clips are not bent or broken.

Check that all clips are positioned fully and correctly.

Replace damaged or missing clips with new ones.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws on underbody to the specified tightening torque. Tightening torque 2 Nm (1.5 ft lb.) Torque screwdriver Nr.89 Pos.5 
scientia non olet · About LEMON Manuals