LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (63 - Bumpers) >> WM 633319 Removing and installing front carrier >> Installing front carrier

Installing front carrier

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws to the specified torque. Tightening torque 55 Nm (41 ft lb.) 
  2. Tighten fastening screws to the specified torque. Tightening torque 4.5 Nm (3.25 ft lb.) 
scientia non olet · About LEMON Manuals