Removing front apron

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment .
The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant .
Some steps must be carried out automatically .
Some of the repair illustrations show only one side of the vehicle .

Unscrew bottom fastening screws -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- and loosen wheel housing liner -2- in the front area.
Unscrew fastening screws -3- .
Release and disconnect electric plug connections -4- .
Unclip fixing clip -5- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws at the side -1- .
Unscrew fastening screws at the top -2- .
Unclip front apron -3- and remove it by pulling it forward.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.