Removing control unit for memory seat adjustment

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Voltage peaks

Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work.
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
Do not touch electric pins and plug contacts.

Release clip -1- (-a- ), swivel it aside -b- and remove electric plug connection from the control unit for memory seat adjustment -2- .
Release electric plug connection -3- (-c- ) and pull it off the control unit for memory seat adjustment.
Release electric plug connection -1- (-a- ) and pull it off the control unit for memory seat adjustment -2- .
Disengage control unit for memory seat adjustment -1- by moving it forward out of the holder -2- and remove it.