Installing rear right backrest
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The illustrations show the other side as an example.
- The removal and installation procedure for this side is practically identical.
- Guide rear right backrest -1-
into the mount on the body -2-
(- A-
).
- Only for vehicles with heated seats: Connect electric plug connection between the rear seat and backrest.
- Guide rear right backrest -1- into the center mount -3- (- B- ).
- Install supporting bow -1-
and secure it Tightening torque 12 Nm (9 ft lb.)
.
Information
Always replace the fastening screws on the seat assembly after customer service and reworking.
Micro-self-locking or self-tapping screws must not be modified, greased or loosened and then screwed in again.