Installing backrest frame
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
A second mechanic is required:
- First mechanic:
Fit backrest frame.
- 1.1. Fit backrest frame on seat frame.
- 1.2. Pull electric line through between the seat frame and seat padding.
- Second mechanic:
Tighten two fastening screws -1-
for the backrest frame on both sides Tightening torque 33 Nm (24 ft lb.) +/-3 Nm (+/-2 ft lb.)
.
- Engage the bracket -6-
from below - J-
.
- Tighten fastening screws -5- (Tightening torque 7.5 Nm (5.5 ft lb.) +/-0.5 Nm (+/-0.5 ft lb .).
- Fit fixing clip -7-
.
- Engage rear side cover -8- on the seat frame - K- .
- Plug in two electric plug connections on the underside of the seat - A-
until the connector engages securely.