Installing trim panel for seat: Notes
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Fixing clips on the seat frame will be damaged irreparably during removal. Replace expansion rivets and fixing clips during installation and do not re-use them.
- Connect electric plug connection for seat adjustment - A
and lock it - a-
.
Information
Check that the wiring harness for the seat adjustment is correctly routed:
Route the wiring harness -1- in the front area under the bracket -2- and in the side area along the bracket -2- .
In the side area, position the wiring harnesses above the sealing surface -3- .
Once correctly routed, secure the wiring harness in the clips or with tie-wraps.
- Fit trim panel for seat -2-
at the front - C-
and guide it in at the rear from above - B-
into the seat - A-
.
- Secure trim panel for seat -2- with the expansion rivets -1- .