LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (72 - Seat Frames) >> WM 7201IN Mounting front seat on assembly fixture >> Mounting front seat on assembly fixture

Mounting front seat on assembly fixture

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Seat Repair Stand WE 1678 -1-  must be fitted on the Engine and Gearbox Support WE 1323 -2-  .
    G12890476
  2. Adjust the seat mounting.
    1. 2.1. Loosen locking lever -1- (- A-)  .
    2. 2.2. Adjust seat mounting -2-  according to the width -Marking B-  of the seat frame - B-  .
    3. 2.3. Secure locking lever -1-  .
    G12890477
  3. Adjust the latch.
    1. 3.1. Loosen fastening screw -1-  and slide locking wedge -2-  as far as the outer edge of the seat mounting -3-  (- A-  ).
    2. 3.2. Tighten fastening screw -1-  .
    3. 3.3. Slide locking lever -4-  as far as the outer edge of the seat mounting -3-  (- B-  ).
    G12890478
  4. Fit front seat.
    1. 4.1. Position the front seat -1-  on the seat mounting -2-  .
    2. 4.2. Slide the seat frame as far as it will go into the locking wedge -3-  (- A-  ).
    3. 4.3. Slide locking lever -4-  into the seat frame - B-  and lock it.

      Increase or reduce the preload on the locking lever -4-  using the adjusting screw -5-  if necessary.

    G12890479
scientia non olet · About LEMON Manuals