Technical values

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATION

Location	Description	Type	Basic value	Tolerance 1
Gateway control unit to body	Internal Torx screw, M5 x 16	Tightening torque	9 Nm (6.5 ft lb.)
Holder for horn to front bumper	Internal serration screw, M8 x 20	Tightening torque	20 Nm (15 ft lb.)
Stopwatch or compass to cover for center loudspeaker	Internal Torx screw, M5 x 20	Tightening torque	3 Nm (2 ft lb.)
Instrument cluster to dashboard	Internal Torx screw, M5 x 16	Tightening torque	3.2 Nm (2 ft lb.)
Steering wheel electronics control unit to steering-column switch	Internal Torx screw, Ø 2.5 x 12	Tightening torque	0.5 Nm (0.5 ft lb.)
Lane Change Assist control unit to holder	Internal Torx screw, M5 x 14	Tightening torque	3 Nm (2 ft lb.)
Rear woofer to rear door	Internal Torx screw, M5 x 20	Tightening torque	4 Nm (3 ft lb.)
Subwoofer to body	Hexagon-head bolt, M6 x 16	Tightening torque	9 Nm (6.5 ft lb.)
Antenna amplifier to tailgate	Hexagon-head bolt, M6 x 20	Tightening torque	9 Nm (6.5 ft lb.)
Antenna control unit to tailgate	Hexagon-head bolt, M6 x 20	Tightening torque	9 Nm (6.5 ft lb.)
SDARS antenna to vehicle roof	Hexagon nut	Tightening torque	7 Nm (5 ft lb.)	+1 Nm (+0.5 ft lb.)
Loudspeaker booster to holder	Internal Torx screw, M6 x 12	Tightening torque	6 Nm (4.5 ft lb.)
TV tuner to holder	Internal Torx screw, M6 x 12	Tightening torque	6 Nm (4.5 ft lb.)
Holder for loudspeaker booster and TV tuner to body	Nut, M6	Tightening torque	9 Nm (6.5 ft lb.)
PCM display and operator control unit to the instrument panel	Internal Torx screw, M5 x 16	Tightening torque	4 Nm (3 ft lb.)
Telephone bracket to center console	Internal Torx screw, Ø 3 x 7	Tightening torque	0.5 Nm (0.5 ft lb.)
ParkAssist control unit to body	Nut, M6	Tightening torque	3 Nm (2 ft lb.)
Filler neck for windscreen washer system to body	Internal Torx screw, M6 x 14	Tightening torque	7 Nm (5 ft lb.)
Windscreen-washer reservoir to body	Internal Torx screw, M6 x 16	Tightening torque	7 Nm (5 ft lb.)
Wiper linkage to body	Internal Torx screw, M6 x 28	Tightening torque	8 Nm (6 ft lb.)
Wiper arm to wiper linkage	Hexagon nut, M10	Tightening torque	32 Nm (24 ft lb.)
Wiper motor to wiper linkage	Internal Torx screw, M6 x 16	Tightening torque	12 Nm (9 ft lb.)	+/-1 Nm (+/-0.5 ft lb.)
Distance from left wiper arm to cowl panel cover	Dimension a	Nominal value	30 mm
Distance from right wiper arm to cowl panel cover	Dimension b	Nominal value	34 mm
Distance from upper edge of windscreen to spray point of inner spray jet	Dimension a	Length	200 mm
Distance from side edge of windscreen to spray point of inner spray jet	Dimension b	Length	535 mm
Distance from upper edge of windscreen to spray point of center spray jet	Dimension c	Length	325 mm
Distance from side edge of windscreen to spray point of center spray jet	Dimension d	Length	335 mm
Distance from upper edge of windscreen to spray point of outer spray jet	Dimension e	Length	480 mm
Distance from side edge of windscreen to spray point of outer spray jet	Dimension f	Length	165 mm
Wiper arm for rear window washer to wiper axle	Hexagon nut, M8	Tightening torque	19 Nm (14 ft lb.)
Wiper motor for rear window washer to rear lid	Hexagon nut, M6	Tightening torque	8 Nm (6 ft lb.)
Distance from center wiper lip to lower edge of windscreen	Dimension a	Nominal value	25 mm
Tilt angle of light/dark limit of dipped beam headlight		Adjustment value	-1 %
Tilt angle of light/dark limit of fog light		Adjustment value	-2 %
Distance between collection box and main headlight	Dimension a	Length	300 mm	+400 mm
Distance between collection box and fog light	Dimension a	Length	300 mm	+400 mm
Tail light to body	Internal Torx screw, M6 x 25	Tightening torque	7.2 Nm (5 ft lb.)
Rear retaining strip to body	Collar nut, M6	Tightening torque	7.2 Nm (5 ft lb.)
Rear retaining strip to front retaining strip	Internal Torx screw, Ø 5 x 16	Tightening torque	2 Nm (1.5 ft lb.)
Tail light to rear lid	Collar nut, M6	Tightening torque	7.2 Nm (5 ft lb.)
Auxiliary headlight to front apron	Internal Torx screw, Ø 5 x 16	Tightening torque	6 Nm (4.5 ft lb.)
Reversing light to rear apron	Internal Torx screw, Ø 5 x 16	Tightening torque	2.3 Nm (1.5 ft lb.)
Fog light to front apron	Internal Torx screw, Ø 5 x 16	Tightening torque	2 Nm (1.5 ft lb.)	+/-0.5 Nm (+/-0.3 ft lb.)
Light bulb control unit to headlight	Internal Torx screw, Ø 4 x 12	Tightening torque	1.5 Nm (1 ft lb.)
Light bulb igniter to headlight	Internal Torx screw, Ø 4 x 12	Tightening torque	1.5 Nm (1 ft lb.)
Headlight to headlight mounting	Hexagon-head bolt, M6 x 20	Tightening torque	8 Nm (6 ft lb.)
Headlight mounting to body	Hexagon socket head bolt, M6 x 30	Tightening torque	9 Nm (6.5 ft lb.)
Seal to headlight	Internal Torx screw, Ø 4 x 12	Tightening torque	2 Nm (1.5 ft lb.)
Distance from light collection box to main headlight	Dimension a	Length	300 mm	+300 mm
Alarm siren holder to cowl panel	Collar nut, M6	Tightening torque	7 Nm (5 ft lb.)
Clamp securing steering-column switch to steering column	Hexagon socket head bolt, M6 x 15	Tightening torque	4 Nm (3 ft lb.)
Holder securing garage door opener control unit to lock support	Internal Torx screw, M6 x 22	Tightening torque	6 Nm (4.5 ft lb.)
Switch console to center console	Internal Torx screw, M5 x 20	Tightening torque	4 Nm (3 ft lb.)
Ground line to ground pin in body	Nut, M6	Tightening torque	9 Nm (6.5 ft lb.)
Ground line to tailgate	Screw, M6	Tightening torque	9 Nm (6.5 ft lb.)
Positive cable to power distributor	Nut, M8	Tightening torque	16 Nm (12 ft lb.)
Positive cable to power distributor	Nut, M6	Tightening torque	7.5 Nm (5.5 ft lb.)
Positive cable to power distributor	Screw, M6	Tightening torque	7.5 Nm (5.5 ft lb.)
Cutoff relay to power distributor	Nut, M8	Tightening torque	8 Nm (6 ft lb.)
Fuse element to power distributor	Nut, M6	Tightening torque	7.5 Nm (5.5 ft lb.)
Connection terminal for B+ positive cables to jump-start point	Connection terminal, M8	Tightening torque	20 Nm (15 ft lb.)
Positive cable to jump-start point	Nut, M6	Tightening torque	7.5 Nm (5.5 ft lb.)
Positive cable to B+ line	Nut, M6	Tightening torque	7.5 Nm (5.5 ft lb.)
Ground line to longitudinal member	Cap nut, M8	Tightening torque	20 Nm (15 ft lb.)
B+ positive cable to potential distributor on longitudinal member	Nut, M8	Tightening torque	20 Nm (15 ft lb.)
Fuse box in luggage compartment to body	Combined nut, M6	Tightening torque	3 Nm (2 ft lb.)
Positive cable to fuse box in cowl panel	Nut, M6	Tightening torque	9 Nm (6.5 ft lb.)
Connector console under driver's or passenger's seat to body	Combined nut, M6	Tightening torque	3 Nm (2 ft lb.)