LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 742 (9X - Electrical System - General) >> WM 9X00IN Measurement of closed-circuit current >> Measurement of closed-circuit current >> Connecting measuring device

Connecting measuring device

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use crocodile clips to connect the measuring device to the battery ground terminal and body ground point.
  2. Loosen ground strap on the body and secure against contact with the body. The entire vehicle current now flows through the ammeter.
  3. Place an additional short circuit bridge over the input socket of the measuring device to prevent damage to the measuring device.
scientia non olet · About LEMON Manuals