LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (70 - Linings, Insulation) >> WM 708719 Removing and installing trim panel for rear lid >> Installing trim panel for rear lid

Installing trim panel for rear lid

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that the fixing clips are not bent or broken. Replace missing or damaged fixing clips with new ones. Make sure that all fastening clips have engaged correctly. Check that they are fitted correctly.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw for storage bin to until secure.
  3. Tighten fastening screw for finger plate to until secure.
scientia non olet · About LEMON Manuals