Installing headliner
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Make sure that the roof cover does not buckle.
Information
Check that the fixing clips are not bent or broken.
Replace missing or damaged fixing clips with new ones.
Make sure that all guide tabs and locking lugs are positioned correctly.
Check that they are fitted correctly.
- Installation is performed in reverse order to removal.
- Tighten fastening screw under the roof console to Tightening torque 5 Nm (3.5 ft lb.) .
- Tighten fastening screw on the net cover holder to Tightening torque 9 Nm (6.5 ft lb.) .