LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (70 - Linings, Insulation) >> WM 706819 Removing and installing C-pillar trim panel >> Technical values

Technical values

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION

Location Description Type Basic value Tolerance 1 Tolerance 2
Belt guide clip to body   Tightening torque 20 Nm (15 ft lb.)    
scientia non olet · About LEMON Manuals