Removing C-pillar trim panel
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle.
- Remove upper part of side trim panel for luggage compartment. → 700319 REMOVING AND INSTALLING SIDE TRIM PANEL FOR REAR LUGGAGE COMPARTMENT
- Remove side airbag and loosen rear inner door sill trim at the top of the C-pillar. → 680519 REMOVING AND INSTALLING REAR INNER DOOR SILL TRIM
- Unscrew fastening screws and remove belt guide clips -1- .
- Unclip C-pillar trim panel -2- .
- Guide tab -3-
out of mounting -4-
and remove trim panel -2-
.