Removing upper part of B-pillar trim panel

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
Some steps must be carried out automatically.
Some of the repair illustrations show only one side of the vehicle.

Set height adjustment -1- to the lowest position.
Remove seat belt mount at the front seat. → 691119 REMOVING AND INSTALLING FRONT THREE-POINT BELT
Disengage trim panel -2- from the fixing clips in the lower area.
Guide belt strap and belt latch out through the trim panel -2- .
Guide out tabs -3- in direction of arrow and remove trim panel -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.