LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (70 - Linings, Insulation) >> WM 705819 Removing and installing dashboard moulding on driver's side at the left and right >> Installing dashboard moulding on driver's side at the left

Installing dashboard moulding on driver's side at the left

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that the fixing clips are not bent or broken.

Replace missing or damaged fixing clips with new ones.

Make sure that all fastening clips have engaged correctly.

Check that they are fitted correctly.

  1. Position moulding and screw it to the air vent.
  2. On vehicles with illuminated air vents, connect electric plug connection.
  3. Position air vent with moulding on the dashboard and engage it in the fixing clips.
scientia non olet · About LEMON Manuals