Removing carpet
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle.
- Carefully lift up rear scuff plate -1 - in the front area and remove carpet -2- .
- Lift carpet -2- in the rear area - A- .
- Guide all electric lines out of the carpet -2- .
- Disengage the carpet -2- at the sides from the retaining pivot -3- .
- Pull carpet -2- back slightly.
- Press carpet -2- together slightly in the footwells, guide it out at the trim panels -4- and remove it by pulling it to the rear.
- Remove carpet -2-
.