LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (70 - Linings, Insulation) >> WM 703919 Removing and installing cover for rear lock support >> Technical values

Technical values

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION

Location Description Type Basic value Tolerance 1 Tolerance 2
Cover for rear lock support to body Fastening nut Tightening torque 2.5 Nm (2 ft lb.)    
scientia non olet · About LEMON Manuals