Removing dashboard trim panel
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle.
- Unclip trim -1-
at the dashboard and remove it.
- 1.1. Position a suitable tool at the cut-out -2- between the trim panel -1- and dashboard.
- 1.2. Unclip trim panel -1 - near the fixing clips on the dashboard.
- 1.3. Guide trim -1- out of the brackets -3- for the side-section trim panel at the front and remove it.