Distance measuring sensor control unit
WARNING: This page is about a different car, the 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Holder for distance measuring sensor control unit to closing panel | Internal Torx screw, M6 x 12 | Tightening torque | 8 Nm (6 ft lb.) | ||
| Holder for distance measuring sensor control unit, lower to plastic bracket | Internal Torx screw, 0 5 x 16 | Tightening torque | 2.5 Nm (2 ft lb.) |