No Identifiable Deformations On The Body Structure
WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Check seam joining line on the accessories; Refer to WM 6X00IN GAP DIMENSIONS (EXCEPT MACAN SPORT EDITION) .
- Check accessories for paint abrasion (accessories that were hit during impact)
- Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g. Measuring unit, professional WE 1397 ) and compare with the required values.
- Determine extent of any apparent damage to vehicle parts Measure running gear electronically if necessary; Refer to 449503 SUSPENSION ALIGNMENT COMPLETE .
- Decide whether the vehicle has to be repaired
Repair vehicle, if necessary.
- Check seam joining line on the accessories
Refer to WM 6X00IN GAP DIMENSIONS (EXCEPT MACAN SPORT EDITION) .
- Check accessories for paint abrasion (accessories that were impacted during the crash)
- Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g. Measuring unit, professional WE 1397 ) and compare with the required values.
- Determine the extent of any damage to chassis components Measure the chassis electronically if necessary
Refer to 449503 SUSPENSION ALIGNMENT, COMPLETE .
- Decide whether the vehicle has to be repaired
Repair the vehicle, if necessary.
Model year as of 2014, Model year up to 2020