LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (Lids, Flaps -- (95B) MACAN) >> WM 559019 Removing and installing rear lid >> Technical values

Technical values

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for lid hinge   Tightening torque 10 Nm (7.5 ftlb.)    
G11984009

Rear lid hinge 
scientia non olet · About LEMON Manuals