LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (Lids, Flaps -- (95B) MACAN) >> WM 557319 Removing and installing actuating cylinder for rear lid >> Function test on rear pneumatic springs

Function test on rear pneumatic springs

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The two fitted pneumatic springs must hold the lid open.
  3. Close the lid.

95BAA1, 95BAB1, 95BAC1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAS1, 95BAX1, 95BAY1, 95BAZ1

Model year as of 2014

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C45, C46, C96, C97, C98, C99