Preliminary Work
WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary Work For Body Repairs (With Straightening System)
- Remove accessories in the repair area.
- 1.1. Remove accessories in the repair area according to the extent of damage on the vehicle.
- Set up straightening bench with straightening system.
- Set vehicle on straightening bench.
- Cover accessories adjacent to the repair area on the vehicle.
- 4.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
- Reshape connection area of the sheet metal parts to be replaced. See Information on aluminium repairs. Refer to WM 5X00IN WELDING ALUMINUM .
- Expose joint areas.
- 6.1. Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
- Remove B-pillar. Refer to 514155 REPLACING B-PILLAR .
- Remove outer side member. Refer to 514555 REPLACING OUTER SIDE MEMBER .