LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 602 (53 - Body Rear - (95B) MACAN) >> WM 536919 Removing And Installing Rear Wheel Housing Liner >> Installing Rear Wheel Housing Liner

Installing Rear Wheel Housing Liner

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws to the specified tightening torque. Tightening torque 2 Nm (1.5 ftlb.) 
  2. Tighten fastening nuts to the specified tightening torque. Tightening torque 2.5 Nm (2 ftlb.) 
scientia non olet · About LEMON Manuals