LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 602 (53 - Body Rear - (95B) MACAN) >> WM 535655 Replacing Side Section Lower Part >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear lock support. Refer to 531655 REPLACING REAR LOCK SUPPORT - SECTION ON "INSTALLING" .

Subsequent Work For Body Repairs (Without Straightening System) 

  1. Clean joint areas and sheet metal flanges with a wire brush.
  2. Prime joint areas and sheet metal flanges with 2K primer.
  3. Restore standard seal with body sealant. Refer to WM 5X00IN SEAM SEALS .

    Also seal the repair area carefully.

  4. Paint repair area and adjacent surfaces, if necessary.
  5. Restore standard underbody protection with underbody sealant. Refer to WM 5X00IN UNDERBODY PROTECTION .
  6. Apply standard cavity preservation. Refer to WM 5X00IN CAVITY PRESERVATION . Also apply cavity preservation to the repair area.
  7. Install removed accessories in the repair area.

Model year as of 2014

scientia non olet · About LEMON Manuals