Removing Front Side Member (Front Section)
WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Installation position of front side member (section)
Information:
The final dimension is measured from the new front side member (section).
- Make a rough cut on the front side member (section).
- 1.1. Mark and make cuts. → Distance: 100 mm
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Removing front side member (section)