Preparing Front Side Member (Section) For Installation
WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Remove studs -A-
from the left section of the longitudinal member -1-
and right section of the longitudinal member -2-
.
- 1.1. Prepare front side member (section) for welding.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Preparing front side member (section)
| Red |
Plug-welding/apply a full weld using inert gas without bonding |