LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (50 - Body Front - (95B) MACAN) >> WM 506055 Replacing Headlight Mounting >> Preparing Connection Areas Of The Body >> Preparing Body Connection Areas

Preparing Body Connection Areas

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the sealing surface and connections of the body.
  2. De-burr connection points and prepare them for welding.
  3. Prepare marked areas for welding.
    G11978450Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing for welding 

    G11978451Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing for welding 

    G11978452Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing for welding 

  4. Prepare the marked areas for bonding. Refer to WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE 000.043.206.30 , WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00 .vvvv.
    G11978453Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing for bonding 

    G11978454Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing for bonding 

scientia non olet · About LEMON Manuals