LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (50 - Body Front - (95B) MACAN) >> WM 505519 Removing And Installing Wing >> Installing Wing >> Notes

Installing Wing: Notes

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws on outer wing to the specified tightening torque Tightening torque 10 Nm (7.5 ftlb.)  until secure.
  3. Tighten fastening screws on inner wing to the specified tightening torque Tightening torque 10 Nm (7.5 ftlb.)  until secure.
scientia non olet · About LEMON Manuals