Model Values
WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Holder securing garage door opener control unit to lock support | Internal Torx screw, M6 x 22 | Tightening torque | 6 Nm (4.5 ftlb.) | ||
| Transverse strut to body, top | Tightening torque | 9.7 Nm (7.5 ftlb.) | |||
| Transverse strut to body, side | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Support to lock carrier | Tightening torque | 5 Nm (3.5 ftlb.) | |||
| Wing strut to lock carrier | Tightening torque | 9.7 Nm (7.5 ftlb.) | |||
| Retaining strip to lock carrier | Screw | Tightening torque | 9.7 Nm (7.5 ftlb.) | ||
| Carrier to body | Tightening torque | 55 Nm (41 ftlb.) | |||
| Screw-type clamps on intake and boost pressure lines | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Refrigerant lines to condenser connection point | M6 x 25 | Tightening torque | 8 Nm (6 ftlb.) |