LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- (95B) MACAN >> WM 137619 Removing And Installing Pulley (MACAN Only) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for pulley Replace Initial tightening 150 Nm (111 ftlb.)    
Fastening screw for pulley   Final tightening +90°    
Fastening screw for control unit   Tightening torque 2.5 Nm (1.75 ftlb.)    
scientia non olet · About LEMON Manuals