LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- (95B) MACAN >> WM 136319 Removing And Installing Drive Plate (MACAN Only) >> Removing Drive Plate

Removing Drive Plate

  1. Use counter-hold tool 10-201  to loosen the screws. → Counter-hold tool on drive plate 
    G11980354

    Counter-hold tool on drive plate 

    NOTE:

    Risk of damage to outer surface of bearing flange on the drive plate.

    • Use a multiple-tooth socket wrench with a shaft length of at least 40 mm to loosen and tighten the screws. 
  2. Loosen fastening screws.
  3. Remove drive plate at the sensor wheel.
scientia non olet · About LEMON Manuals