LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- (95B) MACAN >> WM 136019 Removing And Installing Flywheel (MACAN Only) >> Installing Flywheel

Installing Flywheel

NOTE:
  • The flywheel must not be tilted during removal and installation. 
  1. Install flywheel.
    1. 1.1. Hold extractor Extractor T40176  at the top and counter at the bottom of the flywheel with your hand.
    2. 1.2. Push flywheel onto the input shaft without tilting it.
    G11980351

    Flywheel 

  2. Remove extractor Extractor T40176  from the flywheel.
    G11980352

    Extractor 

scientia non olet · About LEMON Manuals