LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - (95B) - MACAN >> WM 530555 Replacing Inner Rear Closing Panel (All Models) >> Preliminary Work >> Preliminary Work For Body Repairs (Without Straightening System)

Preliminary Work For Body Repairs (Without Straightening System)

  1. Remove accessories in the repair area.
    1. 1.1. Remove accessories in the repair area according to the extent of damage on the vehicle.
  2. Cover accessories adjacent to the repair area on the vehicle.
    1. 2.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  3. Reshape connection area of the sheetmetal parts to be replaced. Note: Information on aluminum repairs. Refer to the appropriate information on aluminum repairs
  4. Expose joint areas.
    1. 4.1. Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
  1. Remove rear closing panel. → Removing Rear Closing Panel 
scientia non olet · About LEMON Manuals