LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - (95B) - MACAN S >> WM 536855 Replacing (Outer) Rear Wheel Housing >> Preparing Rear Wheel Housing For Installation

Preparing Rear Wheel Housing For Installation

  1. Fit in rear wheel housing.
    1. 1.1. Cut rear wheel housing at the transitions to the remaining section of the wheel housing leaving an overlap of 20 mm.
      G12893489Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Prepare rear wheel housing for bonding and welding.
    G12893490Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Orange Resistance spot-welding + bonding
scientia non olet · About LEMON Manuals