LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - (95B) - MACAN S >> WM 536855 Replacing (Inner) Rear Wheel Housing >> Preparing (Inner) Rear Wheel Housing For Installation >> Notes

Preparing (Inner) Rear Wheel Housing For Installation: Notes

  1. Prepare (inner) rear wheel housing for bonding and welding.
    G12893446Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Prepare seat belt bracket for bonding and welding.
    1. 2.1. Drill holes for plug-welding in the marked areas -A-  using a drill bit with a diameter of → Diameter: 8.0 mm.
      G12893447Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Green Resistance spot-welding + bonding
    Blue Bonding
    Red Plug-welding/apply a full weld using inert gas without bonding
    Orange Resistance spot-welding
scientia non olet · About LEMON Manuals