LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - (95B) - MACAN S >> WM 535555 Replacing Rear Side Section >> Preparing Rear Side Section For Installation

Preparing Rear Side Section For Installation

  1. Fit in rear side section.
    1. 1.1. Cut rear side section at the transitions to the body leaving an overlap of 30 mm.
      G12893372Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Prepare connection areas for bonding and welding.
    G12893373Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Red Plug-welding/apply a full weld using inert gas without bonding
    Green Resistance spot-welding
    Blue Bonding
scientia non olet · About LEMON Manuals