LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 Linings, Insulation -- (95B) MACAN >> WM 708719 Removing And Installing Trim Panel For Rear Lid (All Models Except MACAN Edition) >> Installing trim panel for rear lid

Installing trim panel for rear lid

NOTE:

Check that the fixing clips are not bent or broken. Replace missing or damaged fixing clips with new ones. Make sure that all fastening clips have engaged correctly. Check that they are fitted correctly.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw for storage bin to until secure.
  3. Tighten fastening screw for finger plate to until secure.

95BAA1, 95BAB1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAS1, 95BAX1, 95BAY1, 95BAZ1

Model year as of 2014, Model year up to 2020

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99

scientia non olet · About LEMON Manuals