LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 802 (27 - Starter, Power Supply, Cruise Control 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 278519 Removing And Installing Control Unit For Distance Measuring Sensor >> Installing Control Unit For Distance Measuring Sensor

Installing Control Unit For Distance Measuring Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position holder together with control unit for distance measuring sensor.
  2. Position holder on the bumper and secure using the two fastening screws -1- 
    G15198947Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing holder

  3. Press in the electric plug until it clicks into place.
  4. Position covers for distance measuring sensor and clip them in.
    G15198948Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fitting cover for distance measuring sensor

scientia non olet · About LEMON Manuals