Adjusting Control Unit For Distance Measuring Sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- A battery charger with a current rating of at least 40 A must be connected to the external power feed points.
- Connect > 9818 - PIWIS Tester II to the vehicle and start it up.
- Switch on ignition.
- Select the vehicle and adaptive cruise control control unit and press to continue.
- In the Adaptive cruise control menu select the Maintenance, repairs submenu and press to continue.
- Follow the instructions on the Tester and, if necessary, adjust the sensor -1-
using the adjusting tool > VAS 6190/2 - T-bar Setting Tool for ACC Sensor
in line with the Tester specifications.
Adjusting screws for distance measuring sensor
- The process must be repeated until the message Adjustment successful is displayed or the Tester.