Installing Generator

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Tightening torques, tightening sequence and assembly overviews for the engine and transmission:

Group 1:
> Refer to 1X00IN Technical values in the appropriate service information.
Group 2:
> Refer to 2X00IN Technical values in the appropriate service information.
Group 3:
> Refer to 3X00IN Technical values in the appropriate service information.

The generator is installed in reverse order to removal.

Fitting cable guide:
Fit the generator.

Fit cable guide and secure it with the fastening screw.

The generator is screwed to the engine.

Insert B+ line into the retaining clip and screw it to the generator.

Only now should you lift the cable guide against its stop and tighten the fastening screw.