LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 802 (27 - Starter, Power Supply, Cruise Control 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 270619 Removing And Installing Battery >> Installing Battery

Installing Battery

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert and position the battery.
  2. Position the rail -6-  under the batter, and fit the retaining bar -4-  .
    G15198891Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Positioning battery and retaining bar

  3. Fit the four fastening screws -3 and 5-  and screw in by hand.
  4. Tighten the fastening screws -3-  . > Contact force 10 Nm (7.5 ftlb.) 
  5. Tighten the fastening screws -5-  . > Tightening torque 23 Nm (17 ftlb.) 
  6. Risk of short circuit! First connect the positive cable -2-  , then the negative cable -1-  .
    G15198892Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Attaching terminal clamps

  7. Tighten the terminal clamps. > Tightening torque 6 Nm (4.5 ftlb.) 
scientia non olet · About LEMON Manuals