LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 194019 Removing And Installing Coolant Reservoir >> Installing Coolant Reservoir

Installing Coolant Reservoir

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

The coolant reservoir is installed in reverse order.

  1. Slide the reservoir towards the rear and into the guide.
  2. Fit connections and reservoir screws.

    Fit fastening screw. > Tightening torque 3 Nm (2 ftlb.) 

    Fit vent line.

    Fit coolant hose.

    Plug in connector for the water level sensor.

scientia non olet · About LEMON Manuals