Installing Oxygen Sensor Downstream Of Catalytic Converter
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Fit oxygen sensor. Grease thread on oxygen sensor sparingly with assembly grease 000.043.207.07.
Special tools for oxygen sensors
> Nr.96-3 - Accessory for torque wrench: Angled open-end/ring wrench
> Nr.97 - Accessory for torque wrench: Angled open-end/ring wrench
> Nr.98 - Accessory for torque wrench: Angled open-end/ring wrench for assembly
> V.A.G 1331A - Torque wrench, 6-50 Nm/4.5-37 ftlb .
> Tightening torque 50 Nm (37 ftlb.)