Component Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

High-pressure components =>

Fig 1: Fuel Injectors Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fuel injectors

1	Retainer for injectors; with twist lock and cut-out for the injector's colour clip
2	Screw
3	High-pressure fuel injector

Fig 2: Fuel Distributor Pipe Components Location (V8)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fuel distributor pipe, V8

1	Fuel distributor pipe (fuel gallery, rail)
2	Screw cap
3	High-pressure sensor

Fig 3: High-Pressure Pump Components Location (Turbo Engine)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

High-pressure pump, turbo engine

1	High-pressure pump
2	High-pressure line
3	M6 screw on low-pressure line
4	Low-pressure line
5	Screw socket, M8
6	Screw socket, M6
7	Protective plate
8	Screw, M6 x 20
inset	Required line distance (5 to 8 mm) between components

Fig 4: High-Pressure Pump Components Location (Naturally Aspirated Engine)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

High-pressure pump, naturally aspirated engine

1	High-pressure pump
2	High-pressure line
3	M6 screw on low p "essure line
4	Low-pressure line
5	Screw socket, M8
6	Screw socket, M6
7	Protective plate
8	Screw, M6 x 20
inset	Required line distance (5 to 8 mm) between components