Engine Cooling - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel: Specifications
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Coolant must be collected into a clean container and can be reused if not contaminated.
FLUID
| DESCRIPTION | SPECIFICATION |
|---|---|
| Land Rover premium cooling system fluid | Havoline XLC |
| Coolant concentration | 50% |
| Vehicles with block heater coolant concentration | 60% |
CAPACITY
| ITEM | LITERS |
|---|---|
| Vehicles fitted with 2 zone air conditioning (A/C) | 9.4 |
| Vehicles fitted with 2 zone A/C and fuel fired booster heater (FFBH) | 9.6 |
| Vehicles fitted with 4 zone A/C | 11.2 |
| Vehicles fitted with 4 zone A/C and FFBH | 11.4 |
| HEV battery circuit | 1.5 |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Coolant expansion tank bolt | 2.8 | 2.0 | 25 |
| Coolant outlet assembly bolts | 10 | 7 | 88 |
| Coolant pump bolts | 10 | 7 | 88 |
| Coolant pump pulley bolts | 25 | 18 | 221 |
| Thermostat housing bracket to fan shroud bolt | 5 | 4 | 44 |
| Thermostat housing bolts | 5 | 4 | 44 |
| A/C pipes to condenser nuts | 8 | 6 | 71 |
| A/C pipe to fan shroud bolt | 7 | 5 | 62 |
| Charge air cooler pipe connector to fan shroud bolt | 8 | 6 | 71 |
| Charge air cooler hose clamp to fan shroud bolt | 7 | 5 | 62 |
| Engine cooling module bolts | 15 | 11 | 133 |
| Cooling fan shroud bolts | 7 | 5 | 62 |
| Transmission fluid cooler to fan shroud bolt | 7 | 5 | 62 |
| Coolant bleed screw(s) | 3 | 2 | 27 |